Hi All
I was making a new tail piece jig yesterday morning as I was never happy with the clamping arrangements on mine, I took some photos as I did it so here they are.
Hope somone finds it useful.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| A little Jig http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=3307 |
Page 1 of 1 |
| Author: | RussellR [ Fri Sep 23, 2005 8:49 pm ] |
| Post subject: | |
Hi All I was making a new tail piece jig yesterday morning as I was never happy with the clamping arrangements on mine, I took some photos as I did it so here they are.
Hope somone finds it useful. |
|
| Author: | tippie53 [ Fri Sep 23, 2005 10:01 pm ] |
| Post subject: | |
Hi THanks , isn't it amazing how ingenious we can become john |
|
| Author: | Dave White [ Fri Sep 23, 2005 10:26 pm ] |
| Post subject: | |
Russell, All you need now are a few "reels" and you'll have a set for an Irish Session in the pub! Neat jig! |
|
| Author: | Colin S [ Sat Sep 24, 2005 1:12 am ] |
| Post subject: | |
Russell, do I spot a bolted on FB extension on this one? Colin |
|
| Author: | RussellR [ Sat Sep 24, 2005 4:57 am ] |
| Post subject: | |
Yes you do Colin 
|
|
| Author: | LanceK [ Sat Sep 24, 2005 5:08 am ] |
| Post subject: | |
Great Jig Russell! Although a little pricer, here is Guitar Jigs version - I used this unit again this morning, what I love about it is that with a dedicated router, I'm able to do this operation in under 15 minutes. No set up, and dummy proof! Perfect for me!! 
Full Thread in Archives |
|
| Author: | RussellR [ Sat Sep 24, 2005 5:47 am ] |
| Post subject: | |
Lance I can't quite see from the photos how the guitar holds in, I would be very interested to see. I have not seen any of guitar jigs stuff before, that looks a very nicely made jig. |
|
| Author: | LanceK [ Sat Sep 24, 2005 5:59 am ] |
| Post subject: | |
Russell, it pretty much clamps to the box, using a turning knob, the jig is lined with cork, its self leveling, you just line it up on center, and go to it. All of Guitar Jigs stuff is like this, top notch and well thought out. |
|
| Author: | LanceK [ Sat Sep 24, 2005 6:01 am ] |
| Post subject: | |
Here is another version, made for a wedge inlay. Wedge Inlay |
|
| Author: | CarltonM [ Sat Sep 24, 2005 5:13 pm ] |
| Post subject: | |
Lance, You know, that tool is still not on the Guitar Jigs website. Very frustrating! Why are vendors hiding their products from the people who might want them?! BTW, Russell, good thinking!  |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|